Filter
Top Products
18
Playing Back/Deleting
Photographed Images
Connecting to the
PC
Other Useful
Information
Taking Photographs
Getting Ready
2
1
1
2
Inserting and Removing the SD Card
Before starting
Before inserting or removing the SD card, make sure that the power to the camera is
off.
Open the battery/SD card cover.
Slide the battery/SD card cover in the arrow
direction
1
, then open it
2
.
Insert the SD card in the correct orientation shown.
Hold the SD card with its metal surface facing the touch
panel side, then insert the card as far as it can go.
Close the battery/SD card cover.
Close the battery/SD card cover
1
, then slide it in
the arrow direction
2
.
Make sure that the cover is firmly closed.
To remove the SD card
Open the battery/SD card cover, push the card once so that the card is slightly
ejected, then remove the card slowly.
Important
• Never open the battery/SD card cover or remove the battery while the SD card is being
recorded (the indicator is lit red). Neglecting this could damage the SD card or the data in
the SD card.
• An SD card used with another model or device cannot be used with this camera as it is.
Reformat it before taking photographs.
See page 48.
• This camera is incompatible with the MultiMediaCard
TM
.
Images photographed with this camera will be stored in the SD card. Without inserting the
SD card, you cannot take photographs using the camera.