Filter
Top Products
23
èÄîıÇ∑ÇÈ
Getting Ready
Playing Back/Deleting
Photographed Images
Connecting to the
PC
Other Useful
Information
Taking Photographs
Opening and Closing the Lens Cover
Opening the lens cover
Slide the lens cover in the arrow direction.
Sliding the lens cover will allow the flash to pop up.
Opening the lens cover fully and turning the power on
causes the lens to extend and the camera to be
initiated with the photography mode.
Closing the lens cover
Slightly slide the lens cover in the arrow direction.
Following an alarm the lens will be automatically
returned to the original position and the playback
mode will be selected. Wait until the lens is
completely returned, then close the lens cover by
sliding it.
1
Because the flash is not automatically
returned, gently push the flash down until the latch
clicks.
2
Important
• Do not move the lens cover while the lens is moving. Neglecting this may cause product
damage.
Notes
• With the lens cover opened, you cannot lock the flash down. To return the flash to the
original position, close the lens cover first.
• If the camera has been connected to the PC using a USB cable, the camera is initiated
with the PC mode no matter whether the lens cover has been opened or closed.
Open the lens cover when taking photographs. When not taking photographs, keep the
cover closed to protect the lens.
1
2