Filter
Top Products
51
èÄîıÇ∑ÇÈ
Getting Ready
Playing Back/Deleting
Photographed Images
Connecting to the
PC
Other Useful
Information
Taking Photographs
Connecting to the PC
By connecting this camera to the PC, you can transfer images recorded on SD card to the
PC in order to modify or send to another person through the Internet.
Connection Flow
For the operations of Windows or Macintosh, see the subsequent pages.
Minimum System Requirements
A PC to be connected with this camera must satisfy the following requirements. Before
making a connection, check that all the items have been satisfied.
Install ACDSee
TM
.
Install ACDSee
TM
is a software application for viewing photographed
images on a PC. Use the supplied CD-ROM to install in the PC.
Connect this camera to the PC.
Use the supplied USB cable to make this connection.
Install the USB driver.
When using Windows
®
98 the USB
cable requires the installation of this
driver.
When using
Windows
®
2000,ME, XP
or Macintosh.
CPU
OS
Memory
Free space on
hard disk
Color monitor
Necessary devices
Pentium
®
processor or higher
Windows
®
98/ 2000/ ME/ XP
Pre-installed PC
Power PC G3 processor 266 MHz or
higher
Mac OS 9.0 or later
(Mac OS 9.2 or later recommended)
Mac OSX 10.1 or later
(Mac OS 10.1.3 or later recommended)
Windows PC
64 MB or more
20 MB or more
(Additional space necessary to store images.)
256 colors, 800 x 600 dots min., 32,000 colors or more
CD-ROM drive, USB port
Macintosh
When using Mac OS 9.0 or 9.1, you need to install CarbonLib 1.3 or later.
You can download the program from the web site of Apple Computer, Inc.
*This does not assure that all PCs with the minimum requirements will connect properly.