Filter
Top Products
45
èÄîıÇ∑ÇÈ
Getting Ready
Playing Back/Deleting
Photographed Images
Connecting to the
PC
Other Useful
Information
Taking Photographs
To fill in a desired area
1) Tap the [ ] icon on the palette, then select the pen thickness
and pen color.
2) Tap the [ ] key, then enclose the desired area by dragging.
The start and end
points of your drawing
must be jointed.
3) Tap the [ ] key, then tap the [ ] icon and the filling-in color
on the palette.
4) Tap the [ ] key, then tap any point inside the enclosed area.
The enclosed area is filled in with the selected color.
If the start and end points of your drawing have not been jointed, the entire
picture will be painted into one color.
Note
• Tapping the [ ] key causes the menu screen to be restored. A save confirmation screen
appears if the processed image is not saved.
To correct letters or illustrations
1) Tap the [ ] icon on the palette to select the eraser thickness.
2) Tap the [ ] key, then correct the drawing by dragging on the
screen.
The portion that you trace is erased.
Note
• Once a processed image is saved, it cannot be processed again.
Tap the [ ] icon on the palette, after a save
confirmation screen appears, tap the [
] icon.
A copy of the original image is made then combined
with your drawing. The processed image is saved as
another image and the original image is kept as an
unprocessed image. The size of all processed
images will be 640 x 480 pixels.
Save icon
Incorrect
Correct