Filter
Top Products
20
3. Quickly (within 30 seconds) press the
PAIRING
key on the camera cable. The green Pair LED on
the selected camera blinks once, pauses, and then stays on to indicate that data transmission is
in progress.
PAIRED
displays on the screen if pairing is successful or
PAIRING FAIL
if it isn’t. If Pairing fails,
repeat these steps. If Pairing fails again, move the camera and monitor closer together and
repeat.
Press
ESC
to back out and return to the main menu or press
VOL+
or
VOL
to select another
camera to pair.
Image Brightness
1. With the
SETUP DETAIL OPTIONS
screen displayed for a camera, press
CH+
to highlight the
Brightness selection.
2. Press
VOL+
or
VOL
to adjust the camera’s brightness; the five levels are OFF, 1 - 4. The default
level is 2.
3. Press
M
to
accept the new setting and return to the
SETUP DETAIL OPTIONS
screen. Select
another camera if needed.