Filter
Top Products
26
1. From the
RECORDER SETUP
screen, use
VOL+
and
VOL
to select
SETUP MASKING AREA
; press
M
to enter. The
SETUP MASKING AREA
screen displays:
2. Use
CH+
and
CH
to select a camera (1 - 4) for setting up the masking area. Press
M
to enter the
camera masking preview page.
3. A grid displays over the image on the screen. While in masking preview, use
CH+
,
CH, VOL+
,
and
VOL
to select the masking block(s) where motion is to be ignored. Press
M
to confirm
each selection. You can also press
M
again to unmask a block.
4. Press
ESC
to save the entire mask and return to the previous screen. Mask other cameras as
needed.
Record Time
Use
RECORD TIME
to set a specific length of time for motion recording. Options are 2, 5, or 10
minutes.