Filter
Top Products
53
SOLVING PROBLEMS
If you have any trouble with your system, try these simple steps. If you are still having a problem
with your camera, check the manual that came with your camera.
If… Try..
Motion detection won’t
respond to movement.
• Increasing the motion sensitivity (see page 24).
• Checking the settings on the
RecoRd ScHeduLe
screen (see
page 22).
Motion detection goes off
when there’s nothing there.
• Decreasing motion sensitivity (see page 24).
• Refer to General Placement Considerations on page 6.
I can’t play my video clips
in another program
• You must install Uniden Media Player to play back recorded files.
This player is found on the CD included in the box.
I schedule a recording,
save the schedule, and the
recording does not happen
at the scheduled time.
• Ensure that the system time is set to the current time.
• Make sure that the SD card is inserted into the monitor and there is
still memory available on that card.
The camera’s signal status
icon shows no bars
• Making sure the camera is plugged in and the red LED is on.
• Making sure the camera is paired to the correct channel.
• Re-pairing the camera and monitor.
• Moving the camera closer to the monitor; it might be out of range.
• Making sure the camera setting is turned on
(refer to
ACTIVATE OR
DEACTIVATE
screen on page 21).
The camera’s signal status
icon shows one or two bars
or the video quality is poor
See General Placement Considerations on page 6 for tips on
improving video quality.
The camera won’t pair with
the monitor
• Making sure the camera is plugged in and the red LED is on.
• Pressing and releasing the pairing button quickly. Do not press and
hold the pairing button.