Filter
Top Products
31
or to not have a bright LCD when sleeping. If Power Saving mode is on, motion detection events
will turn the LCD screen back on.
1. From the
SYSTEM SETUP
screen, use
VOL+
and
VOL
to select
poWeR SAvinG
; press
M.
The
poWeR SAvinG
screen displays.
2. Use
CH+
and
CH
to choose between
5 min
, or
10 min
; the third option is
ALWAyS on
,
which keeps the system from entering Power Saving mode. Press
M
to accept the setting
and return to the
poWeR SAvinG
screen.
Multi Channel Idle Display
This screen lets you decide if the channels will display in quad mode or if they will cycle individually
in 5, 10, or 15 second intervals.
1. From the
SYSTEM SETUP
screen, use
VOL+
and
VOL
to select
muLti cHAnneL idLe
diSpLAy
; press
M.
The
muLti cHAnneL idLe diSpLAy
screen displays.