ICA-500 User’s Manual
20/80
Advanced Function Area
Advanced function area: only available for administrator. It has contained three
categories.
Setting System Configuration
Trigger Send out current message or setup activities
Capture Capture current screen and save to HDD or other media
Setting menu consists of the Basic menu and the Application menu. The Basic menu is
used for basic settings of the ICA-500, and the Application menu is used for setting
various applications according to individual. Click on each menu name to display its
setting page.
Basic Setting
For the setting, you will see there are divided into two categories – Basic Setting and
Application.
Basic Setting
Symbol
Item Action
System Define Frame Rate, Turn on/off “Remote camera control”, and
view system log file.
Camera Adjust camera parameters and set camera tour
Network Configure Network setting such as DHCP On/Off, DDNS and
PPPoE
User Setup user name, password and login privilege
IP Filter Setup legal IP address of user login (This function should be
used with function “User” respectively)
Event Define the event from Motion detection and sensors for
security purpose
System: Define Frame Rate and Turn on/off “Remote camera control”