Filter
Top Products
ICA-500 User’s Manual
24/80
Image, Rotate, Mirror, Focus Mode, White Balance Mode:
These functions are available for PTZ ICA-500, only. It’s not functional for this model.
Saturation, Sharpness, Contrast, Hue:
To control the camera, key in these values respectively.
Camera Tour:
Tour Name: The group name of the sequence of camera tour
Dwelling Time: The time period between every tour point.
Sequence: 16 points can be assigned. The tour point will also show the location name
if you had entered the location name while preset the camera.
Enable: Which sequence group should be activated.
To use the camera tour function, user must preset some camera positions first. The
maximum number of preset points is16.
In the Camera Tour page, choose the one tour name from A to E. Fill the dwelling time
and tour sequence by preset points, and then save these setting. You can repeat above
procedure to set more camera tours.
Now, you could choose one of the camera tours and click “SAVE” button to enable it.
Reset to Default:
Restore the values of these pages to factory default value.