Veo ICA-500 Digital Camera User Manual


 
ICA-500 Users Manual
44/80
Warning: The download firmware procedure cannot be interrupted. If the
power and/or network connection are broken during the download procedure, it
might possibly cause serious damage to the ICA-500. Suggest that do not upgrade
firmware via Wireless LAN due to high error rate possibly.
Please be aware that you should not turn off the power during updating the firmware and
wait for finish message.
Once the upgrading process completed, the ICA-500 will reboot the system automatically.
Note
: please wait for 20 seconds, and then you can connect to ICA-500 again.
Factory Default: Recall the ICA-500 factory default setting
The Factory Default button will restore to the factory default configuration, all
information changed and saved on the flash will be lost, and restored to the factory
default setting.
Check the Restore box, then click Reboot button. You will be prompt before
restore to factory default setting.
Select OK to continue, or Cancel to abort it.