ICA-500 User’s Manual
28/80
The ICA-500 can directly connect to the ADSL, however, it should be setup on LAN
environment to setup the PPPoE information, and then connect to the ADSL modem.
Power on again, then the ICA-500 will dial on to the ISP connect to the WAN through the
ADSL modem.
The procedures are
• Connect to the LAN by DHCP or Fixed IP
• Access the ICA-500, enter Setting è Network.
• Check the radio button of “PPPoE Setting”.
• If the ADSL Modem and ICA-500 were connected on a hub, after the ICA-500
information were inputted, then you can press “Dial” to do the PPPoE dial.
• Input the “User” and “Password” fields by the account and password provided by