Open as PDF
buttons( ) to toggle the selection. Select Yes and press the OK button to re-format
the CF card and returns to the Setup menu. Select No and press the OK button to cancel
and return to the Setup menu without any change.
Sets video output type.
The camera provides 2 different video output type for your selection: NTSC and PAL.
Select the correct video type for the connected device (e.g. NTSC TV or PAL TV).
Auto Power Off
If no operation is carried out for a fixed amount of time, power consumption is set to its
minimum state to prevent battery wear. This is called the Auto Power Off mode.
The camera provides 4 different auto power off time for your selection: 3 Min (default),
5 Min, 10 Min, 30 Min
Select Auto Power Off by the Arrow button(
) and then press the OK button to
confirm. The cursor skips to data field as the OK button being pressed. Use the
) to select the desired time. Press the OK button again to make the
change. The cursor returns to the Setup menu automatically when the change is made.