Filter
Top Products
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
34
basic configurations. If people other than administrators will be allowed to use NetworKam,
administrators should add these user profiles in the users option. While NetworKam accepts dial-in
connection and acts as a server, the user name and password used in dialing are the same as what was
stored in the user database managed for web access. Any managed user can be authorized during PPP
negotiation and access web pages. However only administrators can access the configuration page.
There is more information needed for correct modem operation. Refer to the modem setting section in
configuration for further settings. NetworKam will wait for someone to dial in. If the administrator has
setup some conditions in the application, NetworKam will automatically dial out based on the
administrator's configuration. Refer to the application section in configuration for special security
applications. After everything is set and saved, turn off NetworKam and replace the null modem cable
with modem for dial-up network. Since the null modem connection is used to configure NetworKam in
advance for modem connection, administrators cannot connect again without restarting the system.
If dial-out configuration is activated, NetworKam will dial out to send a system startup log to test and
drop the call after the pre-configured period.