Filter
Top Products
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
92
Q. How fast will NetworKam check the status of digital inputs?
A. NetworKam will check input status in less than half a second. However, to avoid repeatedly checking
conditions too often and to allow the devices connected to digital outputs to function properly,
NetworKam will delay 3 seconds by default after each condition matches. Users may change it according
to specific applications. During this period, any condition will be ignored.
Q. If I set NetworKam to send e-mails of images whenever the conditions are met, will my e-mail account
overflow?
A. It is recommended to use transient state rather than steady state. For instance, use ‘/’ and ‘\’ instead of
‘H’ and ‘L’ to let the condition be triggered only when state is changed.
Q. Why can I not access NetworKam when I setup some options in the application?
A. When NetworKam is triggered by events, snapshots will take more time to write them into memory
and take further action like email or FTP. If the events occur too often, the system will always be busy
with sending images. That will make users feel like the system responding too slowly. If it is in sequential
mode, the uploading speed depends on the network utilization, server performance and how many users
are accessing the video. Once the system is too busy to configure, use the restore factory default and reset
button to save the system.