Filter
Top Products
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
43
System parameters
To change the system name, type in the text box after "Host name". This name will be displayed at the
top of the main page. In the case that only the host name is changed, without adjusting date and time of
NetworKam, click on "Keep current date and time".
There are three ways to adjust system date and time. The easiest is to make NetworKam "Sync with
computer time". The second “Manual” is to set the date and time manually. Notice the format in the
related field while typing. The third “Automatic” is to make NetworKam automatically synchronize with
timeservers over the Internet whenever NetworKam starts up. It may fail if the assigned NTP server
cannot be reached or it is within a local network. Leaving the NTP server blank will let NetworKam
connect to default timeservers or type in assigned NTP server. Domain name or IP address format is
acceptable as long as DNS server is available. Do not forget to set the "Time zone" offset for local
settings. It only affects the hour in NTP method. Click on
to validate changes.