Filter
Top Products
15
Installation
Installing a Paper Guide
11/04/2009 TTP 2100 Operator Guide P1021708-001
9. Select Parameter 63 (BM Sensor) and enter the desired value. Recommended values are:
10. Select Upload One.
11. Select Store Values to Flash PROM.
12. Wait for the printer to buzz as a confirmation that the new value is stored.
Value When Used
0 Auto selects 1 or 4 based on width of media loaded
1 (edge sensor) for ATB tickets without hole in the perforation.
2 (center sensor) for ISO tickets, most other ticket types, and adhesive labels
3 17.5 mm from center sensor
4 12.5 mm from center sensor (for baggage tags according to IATA 740)