Axis Communications 215 PTZ-E Digital Camera User Manual


 
AXIS 215 PTZ/AXIS 215 PTZ-E - Technical Specifications
42
Shutter time • NTSC: 4/3 - 1/50000 sec
• PAL: 8/5 - 1/50000 sec
Audio (AXIS 215 PTZ only) Two-way (full or half duplex) or one-way
G.711 PCM 64kbit/s, G.726 ADPCM 32 or 24 kbit/s
Requires external microphone or line in. Mono audio output (line level) connect
s to PA system or active speaker
with built-in amplifier
Security Multiple user access levels with password protection
IP address filtering
HTTPS encryption
IEEE 802.1X network access control
Users 20 simultaneous unicast users
Unlimited users using multicast (MPEG-4)
Alarm and event
managem
ent
Events triggered by
• built-in multi-window motion detection
• external input (AXIS 215 PTZ only)
• audio detection (AXIS 215 PTZ only)
• temperature
• PTZ preset position
• according to schedule
I ma ge u pl oa d ov er FT P , e ma i l a nd HT T P
Notification over TCP, email, HTTP
Pre- and post alarm buffering in Motion JPEG up to 9 MB (approx 4 min of CIF resolution video at 4 fps)
Connectors AXIS 215 PTZ
• Ethernet 10BaseT/100BaseTX, RJ-45
• Terminal block for 1 alarm input, 1 output and power out for I/O
• Audio line/mic in
• Audio line out
AXIS 215 PTZ-E
• RJ-45 for 10BASE-T/100BASE-TX
• Pre-installed 5 m (16.4 ft.) Cat-5e cable
Processors and memory AXIS ETRAX FS 32-bit RISC CPU
AXIS ARTPEC-2 video compression chip
32 MB RAM, 8 MB flash
Battery backed up real-time clock
Power
12VDC
±
5%, max
14.5W
Operating conditions AXIS 215 PTZ
• 0-45 °C
• Humidity 20 - 80% RH (non-condensing)
AXIS 215 PTZ-E
• -20 to 40 °C (-4 to 104 °F)
• 2 built-in heaters, 3 built-in fans
Temperature warning Warning issued when temperature is below or above limits
Installation, management
an
d maintenance
Installation tool on CD and Web-based configuration
Configuration backup and restore
AXIS Camera Station One for recording. AXIS Camera Management for camera management.
Firmware upgrades over HTTP or FTP, fir
mware available at www.axis.com
Video access from
Web browser
Camera live view for up to 20 clients
Video recording to file (ASF)
Sequence tour for up to 20 Axis video sources
Customizable HTML pages
Minimum web browsing
requirements
• Pentium III CPU 500 MHz or higher, or equivalent AMD,128 MB RAM,
AGP graphics card 32 MB RAM, Direct
Draw
• Windows XP, 2000, DirectX 9.0 or later
• Internet Explorer 6.x or later
• For other operating systems and browser
s see www.axis.com/techsup
Item Specification