Filter
Top Products
BenQ DC 5530 User’s Manual
English
Using the DC X600 9
3.3.1 Switching between Capture mode and Playback mode
•
To change from Capture mode to Playback mode, press the Playback button.
• To change from Playback mode to Capture mode, press the Playback button or
press the shutter release button halfway.
3.4 Capture mode
In Capture Mode, you may select the desired Shooting mode from the Capture mode palette.
For details, refer to “Capture mode palette” on page 6.
3.4.1 Capture mode LCD monitor information
You can display shooting information on the LCD monitor when taking pictures. The display
mode can be changed by pressing the OK/Display button.
Normal Display
Shooting information is displayed when the power is turned on.
(1) Capture mode
(2) Flash mode
(3) Drive mode
(4) Focus mode
(5) Focus frame
(6) Zoom
(7) Card/Built-in memory
(8) Battery indicator
(9) Remaining number of recordable images
(10) Date and time
(11) World Time setting
(12) Anti-shake warning
(13) Aperture
(14) Shutter speed
3.4.2 Using the self-timer
In self-timer mode, the picture is taken ten seconds or
two seconds after the shutter release button is pressed.
1. Press the four-way controller (S) in Capture mode.
2. Press the four-way controller (W X) to select or
.
3. Press the OK button.
The camera is ready to take pictures using the Self-
timer.
4. Press the shutter release button halfway.
36
36
12:00
12:00
36
12:00
09/24/2005
09/24/2005
09/24/2005
F2.6
F2.6
F2.6
1/160
1/160
1/160
10111314 12
51 2 3 4 76 98
OK
OK
OK
OK
Drive Mode
Drive Mode
Self-timer
Self-timer
Drive Mode
Self-timer
DC_X600_UM.book Page 9 Friday, November 11, 2005 9:37 AM