Filter
Top Products
BenQ DC 5530 User’s Manual
English
Using the DC X600 5
USING THE DC X600
3.1 Turning the camera on and off
1. Press the power switch.
The power indicator is illuminated by a green light. The lens extends and the camera
turns on in the Capture mode.
The camera is ready to take pictures by pressing the shutter release button.
• Press the Playback button to switch to the Playback mode and view pictures while
the lens is extended.
• Hold down the Playback button for two seconds to activate the Playback mode
with the lens retracted.
• Hold down the Playback button for more than four seconds to display the con-
tents of the pictures stored in the built-in memory with the SD memory card
inserted.
• When capturing an image, press the shutter release button halfway. The focus frame on
the LCD monitor will light green when the camera is in focus. Then, press the shutter
release button fully. The picture is taken.
2. Press the power switch again.
The camera turns off.
3.2 Operating the mode palette
Once you press the four-way controller (T), the mode palette appears on the LCD monitor.
You can edit an image or change the settings of the camera.
3.2.1 How to operate the mode palette
The guide display is indicated while using the mode palette.
1. Press the four-way controller (T).
In Capture mode, the Capture mode palette appears. In Playback mode, the Playback
mode palette appears.
2. Use the four-way controller (S T W X) to choose an item.
3. Press the OK button.
The screen for each mode appears.
DC_X600_UM.book Page 5 Friday, November 11, 2005 9:37 AM