Filter
Top Products
112 en | Operation via the browser DinionHD 720p IP Camera
AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual Bosch Security Systems
10.1.3 View Control
If the data port is set-up to control a PTZ device, a View Control
tab is shown and activated. Use the controls to position the
camera and to adjust zoom, focus and iris. Six pre-set positions
can be defined and selected.
Move the mouse cursor over the video image; additional options
for controlling peripherals are displayed with the mouse cursor.
10.1.4 Digital I/O
Depending on the configuration of the unit, the alarm input and
the relay output are displayed next to the camera image. The
alarm symbol is for information and indicates the input status
of the alarm input: Active 1 = Symbol lights, Active 0 = Symbol
not lit. The relay on the camera allows the operation of a device
(for example, a light or a door opener).
– To operate, click the relay symbol. The symbol is red when
the relay is activated.
10.1.5 System Log / Event Log
The System Log field contains information about the operating
status of the camera and the connection. These messages can
be saved automatically in a file. Events such as the triggering or
Motion flag set on media item
Discovery of storage not completed
If the information about recorded video is not
cached, a discovery procedure is started to find
all recorded video. During this time, the discovery
symbol is shown. While discovery is executed,
gaps might be shown in places which the
discovery has not yet reached. The gap is
automatically replaced by the true video, when
the correct information is available.