Filter
Top Products
DinionHD 720p IP Camera Advanced Mode | en 67
Bosch Security Systems Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06
9.4.8 Encoder Streams
Select H.264 Settings
1. The codec algorithm for stream 1 is always:
– H.264 MP 720p25/30 fixed
2. Select the codec algorithm for stream 2. The following are
available:
– Copy Stream 1
– H.264 BP+ bit-rate-limited
– H.264 MP SD
3. Select the Non-recording profile for each stream from the
eight profiles that have been defined. This profile is used
when a stream is not used for recording. When a stream is
used for recording, the profile selected on the Recording
Profiles page is used.
Preview >>
Previews of streams 1 and 2 can be shown.
1. Click Preview >> to display a preview of the video for
streams 1 and 2. the current profile is shown above the
preview.
2. Click 1:1 Live View below a preview to open a viewing
window for that stream. Various additional items of
information are shown across the top of the window.
3. Click Preview << to close the preview displays.
Note:
Deactivate the display of the video images if the performance of
the computer is adversely affected by the decoding of the data
stream.
JPEG stream
Set the parmeters for the M-JPEG stream.
– Select the Max. frame rate in images per second (IPS).
–The Picture quality slider allows adjustment of the
M-JPEG image quality from Low to High.