Filter
Top Products
26 en | Installation DinionHD 720p IP Camera
AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual Bosch Security Systems
5.3 Network (and power) connector
Figure 5.4 Network connection
– Connect the camera to a 10/100 Base-T network.
– Use STP (Shielded Twisted Pair) Category 5e cable with
RJ45 connectors. The camera network socket is Auto MDIX
compliant.
– Power can be supplied to the camera via the Ethernet
cable compliant with the Power-over-Ethernet
(IEEE 802.3af) standard.
The multicolored LED beside the Ethernet connection indicates
Power (red), IP connection (green) and IP traffic (green
flashing). It can be disabled in the Installer menu.
By default, power is supplied to the camera via the Ethernet
cable, compliant with the Power-over-Ethernet standard.
1
2
3
4
5
6
E
T
H
P
o
E
ALARM
AUDIO IN
AUDIO OUT
DATA
1
2
3
4
5
6
–
+
12 VDC
24 VAC
STP Cat 5e RJ45
SD