Filter
Top Products
DinionHD 720p IP Camera Operation via the browser | en 113
Bosch Security Systems Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06
end of alarms are shown in the Event Log field. These messages
can be saved automatically in a file.To delete the entries, click
the icon in the top right-hand corner of the relevant field.
10.1.6 Saving snapshots
Individual images from the video sequence that is currently
being shown on the Livepage can be saved in JPEG format on
the computer's hard drive.
– Click the camera icon to save single images.
The storage location depends on the configuration of the
camera.
10.1.7 Recording video sequences
Sections of the video sequence that is currently being shown on
the Livepage can be saved on the computer's hard drive. The
sequences are recorded at the resolution specified in the
encoder configuration. The storage location depends on the
configuration of the camera.
1. Click the recording icon to record video sequences.
– Saving begins immediately. The red dot on the icon
indicates that a recording is in progress.
2. Click the recording icon again to stop recording.
Play back saved video sequences using the Player from
Bosch Security Systems.
10.1.8 Running recording program
The hard drive icon below the camera images on the Livepage
changes during an automatic recording.
The icon lights up and displays a moving graphic to
indicate a running recording. If no recording is taking place, a
static icon is displayed.