Filter
Top Products
114 en | Appendix VideoJet X20
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
8.4 LEDs
The VideoJet X20 network video server has a number of LEDs on its front and rear panels that
show the operating status and can give indications of possible malfunctions:
8.4.1 Power On LED
8.4.2 SFP LED
8.4.3 ETH 1 LED
8.4.4 ETH 2 LED
8.4.5 Connect LED
8.4.6 HDD LED
Does not light up: VideoJet X20 is switched off.
Lights up green: VideoJet X20 is switched on.
Does not light up: No connection.
Lights up yellow: Connection established.
Flashes yellow: Data being transmitted.
Does not light up: No network connection.
Lights up yellow: Network connection established.
Flashes yellow: Data being transmitted over the network.
Does not light up: No network connection.
Lights up yellow: Network connection established.
Flashes yellow: Data being transmitted over the network.
Lights up red: Startup in progress.
Lights up green: Startup complete, VideoJet X20 is operational.
Flashes green: Video connection established.
Flashes red: VideoJet X20 is faulty, for example following failed firmware
upload.
Does not light up: No hard drive fitted.
Lights up orange: Hard drive fitted.
Flashes orange: Hard drive activity.