Filter
Top Products
98 en | Operation VideoJet X20
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
6.3 Saving Snapshots
You can save individual images from the video sequence currently shown on the LIVEPAGE in
JPEG format on your computer's hard drive.
You can save snapshots from either of the two cameras in Dual Video view. The icons below
the camera images apply to the left or right camera image, according to their layout.
X Click the icon for saving single images. The image is saved at a resolution of
704 × 576 pixels (4CIF). The storage location depends on the configuration of the
VideoJet X20 (see Section 5.32.18 Path for JPEG and MPEG files, page 87).
6.4 Recording Video Sequences
You can save sections of the video sequence currently shown on the LIVEPAGE on your
computer's hard drive.
You can save video sequences from either of the two cameras in the Dual Video view. The
icons below the camera images apply to the left or right camera image, according to their
layout.
1. Click the icon for recording video sequences to start recording. The storage location
depends on the configuration of the VideoJet X20 (see Section 5.32.18 Path for JPEG and
MPEG files, page 87). A red dot in the icon indicates that recording is in progress.
2. Click the icon again to stop recording.
6.4.1 Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder (see Section 5.11 Encoder Profile, page 38).
i
NOTICE!
You can play back saved video sequences using the Player from Bosch Security Systems,
which can be installed from the product CD supplied (see Section 3.1 Scope of Delivery,
page 11).