Filter
Top Products
VideoJet X20 Configuration Using a Web Browser | en 75
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
5.27.2 Camera ID
If necessary, enter the ID of the peripheral you wish to control (for example a dome camera or
pan/tilt head). The entered ID relates to the peripheral that is connected to the first video
input. For the second video input, the ID is automatically counted up and assigned to the
peripheral connected to it.
5.27.3 Baud rate
Select the value for the transmission rate in bps.
5.27.4 Data bits
The number of data bits per character cannot be changed.
5.27.5 Stop bits
Select the number of stop bits per character.
5.27.6 Parity check
Select the type of parity check.
5.27.7 Interface mode
Select the required protocol for the serial interface.