Filter
Top Products
28 en | Configuration Using a Web Browser VideoJet X20
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
5.1.3 Establishing the Connection
The VideoJet X20 must be assigned a valid IP address to operate on your network.
The following default address is preset at the factory: 192.168.0.1
1. Start the Web browser.
2. Enter the VideoJet X20's IP address as the URL. The connection is established and after a
short time you will see the LIVEPAGE with the video image.
5.1.4 Maximum Number of Connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each VideoJet X20 can have up to 25 Web
browser connections or up to 50 connections via VIDOS or Bosch Video Management System.