Filter
Top Products
54 en | Configuration Using a Web Browser VideoJet X20
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
5.18.4 Editing a Partition
You can modify the configuration of a partition at any time.
You can perform the required modifications in the Partition Properties window.
1. In the list, click the partition that you want to modify in order to select this partition.
2. Click the Edit partition button. A new window with the entries for the selected partition
is opened.
3. Make the desired changes.
4. Click the << and >> buttons to edit other partitions.
5. Click the Set button to save the modifications.
5.18.5 Partition name
You can enter a new name for the partition.
5.18.6 Partition number
The partition number (= number of the video input) is displayed for information purposes.
5.18.7 Type of recording
Select the required recording type.
In the case of Ring mode the recording proceeds continuously. If the maximum hard drive
space has been reached, the oldest recordings are automatically overwritten.
In the case of Linear mode the recording proceeds until the entire hard drive space is full. The
recording is then stopped until old recordings have been deleted.
!
CAUTION!
All modifications result in the reorganization of the partition and all sequences stored on it are
therefore lost.
Consequently, you should back up all important sequences on the computer's hard drive
before modifying the partition.