Filter
Top Products
217
Contents
Chapter Contents
Connection status of Eye-Fi cards in the camera can be checked
on the shooting screen (in regular information display mode) or
playback screen (in simple information display mode).
(Gray) Not connected Interrupted
(Blinking white) Connecting Not communicating
(White) Connected
Error acquiring Eye-Fi card
information*
2
(Animated)
Transfer in progress*
1
*1 Power saving (=
39) on the camera is temporarily disabled during
image transfer.
*2 Restart the camera. Repeated display of this icon may indicate a problem
with the card.
Images labeled with a [ ] icon have been transferred.
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the
connection status, as needed.
Press the <n> button,
choose [Eye-Fi Settings] on
the [3] tab, and then press the
<m> button.
Choose [Connection info], and
then press the <m> button.
The connection information
screen is displayed.