Canon 1236B001 Digital Camera User Manual


 
Troubleshooting Guide
162
The CF card is not properly inserted. (p.28)
If the CF card is full, replace with a new CF card or erase unnecessary
images. (p.28, 123)
If you try to focus in the One-Shot AF mode while the focus
confirmation light <o> in the viewfinder blinks, a picture cannot be
taken. Press the shutter button halfway again to focus, or focus
manually. (p.33, 58)
If dust is adhering to the LCD monitor, wipe with a lens cloth or soft
cloth.
In low or high temperatures, the LCD monitor display may seem slow
or it might look black. It will return to normal at room temperature.
Set the lens focus mode switch to <AF>. (p.30)
To prevent camera shake, hold the camera still and press the shutter
button gently. (p.32, 33)
If a CF card-related error message is displayed, see page 38 or 163.
The built-in flash’s pop-up mechanism shakes slightly. This is normal.
Shooting
No images can be shot or recorded.
The LCD monitor does not display a clear image.
The image is out of focus.
The CF card cannot be used.
The camera makes a noise when it is shaken.