Filter
Top Products
94
You can prevent the beeper from sounding when focus is achieved or
during self-timer operation.
Under the [z] tab, select [Beep], then
press <0>. Select [Off], then press
<0>.
This prevents shooting if there is no CF card in the camera.
Under the [z] tab, select [Shoot w/o
card], then press <0>. Select [Off],
then press <0>.
If there is no CF card installed and you
press the shutter button, “no CF” will be
displayed in the viewfinder, and you
cannot release the shutter.
How long the image is displayed on the LCD monitor immediately after
capture can be set. If [
Off
] is set, the image review will not be displayed. If
[
Hold
] is set, the image review will be displayed up until the [
Auto power
off
] time. The LCD monitor display will turn off if you put your eye near the
viewfinder, press the shutter button, or do any camera operation.
Under the [x] tab, select [Review
time], then press <0>. Set the time,
then press <0>.
Handy Features
3 Silencing the Beeper
3 CF Card Reminder
3 Setting the Image Review Time