Filter
Top Products
105
3 Setting the Image-Recording Quality
The approximate maximum burst is
displayed on the bottom right in the
viewfinder and on the shooting function
settings screen.
If the maximum burst for continuous
shooting is 99 or higher, “99” will be
displayed.
Maximum Burst During Continuous Shooting
The maximum burst is displayed even when a card is not inserted in the
camera. Make sure that a card is inserted before taking a picture.
If the maximum burst is displayed as “99”, it indicates that you can shoot
99 or more shots continuously. If the maximum burst decreases to 98 or
lower and the internal buffer memory becomes full, “buSY” will be
displayed in the viewfinder and on the LCD panel. Shooting will then be
disabled temporarily. If you stop continuous shooting, the maximum burst
will increase. After all the captured images are written to the card, you
can resume continuous shooting and shoot up to the maximum burst
listed in the table on page 103.
Even if you use a UHS-I class card, the maximum burst indicator will not
change. The maximum burst in parentheses in the table on page 103 will
apply instead.
COPY