Filter
Top Products
A Shooting with the LCD Monitor
182
Each time you press the <
B
> button, the information display will change.
About the Information Display
Exposure level indicator
Shutter speed
Battery check
Exposure
simulation
Drive mode
White balance
Flash exposure compensation
AF method
• d: FlexiZone - Single
• c : Face detection Live
mode
• f: Quick mode
AF point (FlexiZone - Single)
AEB
Highlight tone priority
Image-recording
quality
AE lock
Flash-ready
Picture Style
GPS acquisition
status
Possible shots
Shooting mode
HDR shooting/
Multiple exposures
Wi-Fi transmission status
Eye-Fi card transmission status
Aperture
ISO speed
Auto Lighting
Optimizer
Maximum burst/Multiple exposures remaining
Histogram
Metering mode
Wi-Fi function
The histogram can be displayed when [A1: Expo. simulation: Enable]
(p.189) is set.
You can display the electronic level by pressing the <
B
> button (p.60). Note
that if the AF method is set to [
u Live mode
] or the camera is connected to a
TV set with an HDMI cable, the electronic level cannot be displayed.
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low- or bright-light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram may not be properly
displayed in low- or bright-light conditions.
COPY