Filter
Top Products
Troubleshooting Guide
364
Setting a lower image quality for still photos and shooting fewer
continuous still photos may resolve the problem.
Shooting still photos during movie shooting will cause a
discrepancy between the actual time and time code. When you
want to edit a movie using time code, it is recommended not to
shoot still photos during movie shooting.
If the camera is connected to a printer, a computer, or a GPS
receiver, etc. with an interface cable, Wi-Fi cannot be set ([53]
tab’s [Wi-Fi] will be grayed out). Disconnect the interface cable,
then set the Wi-Fi.
Set the <R> switch to the left (lock release, p.47).
Check the [8C.Fn III -3: Multi function lock] setting (p.313).
Check the [8C.Fn III -5: Custom Controls] setting (p.320).
When I shoot still photos during movie shooting,
the movie shooting stops.
Time code is off.
Wi-Fi
Wi-Fi cannot be set.
Operation Problems
I cannot change the setting with the <6>, <5> dial, or <9>.
The camera button/dial’s function has changed.
COPY