Filter
Top Products
202
Live View Shooting Cautions
Live View Image
Under low- or bright-light conditions, the Live View image may not reflect
the brightness of the captured image.
If the light source (illumination) within the image changes, the screen
may flicker. If this happens, exit Live View shooting and resume shooting
under the actual light source.
If you point the camera to a different direction, it may throw off the Live
View image’s correct brightness momentarily. Wait until the brightness
level stabilizes before shooting.
If there is a very bright light source in the picture, the bright area might
appear black on the LCD monitor. However, the actual captured image
will correctly show the bright area.
In low light, if you set the [52: LCD brightness] to a bright setting, noise
or irregular colors may appear in the Live View image. However, the
noise or irregular colors will not be recorded in the captured image.
When you magnify the image, the image sharpness may look more
pronounced than in the actual image.
Custom Functions
For Live View shooting, certain Custom Function settings will not take
effect (p.303).
Lens and Flash
The focus preset function is possible for Live View shooting only when
using a (super) telephoto lens equipped with the focus preset mode
marketed since the second half of 2011.
FE lock and modeling flash will not work if an external Speedlite is used.
COPY