Filter
Top Products
60
You can display the electronic level on the LCD monitor, and in the
viewfinder or on the LCD panel to help correct camera tilt. Note that you
can check only the horizontal tilt and not the forward/backward tilt.
1
Press the <B> button.
Each time you press the <B>
button, the screen display will
change.
Display the electronic level.
If the electronic level does not
appear, set [53: z button
display options] so that the
electronic level can be displayed
(p.332).
2
Check the camera’s tilt.
The horizontal tilt is displayed in 1°
increments.
When the red line turns green, it
indicates that the tilt is corrected.
Q Displaying the Electronic Level
Displaying the Electronic Level on the LCD Monitor
Horizontal level
Even when the tilt is corrected, there may be a margin of error of ±1°.
If the camera is very tilted, the electronic level’s margin of error will be
bigger.
With this same procedure, you can display the electronic level during Live
View shooting and before shooting a movie (p.182, 210). Note that the
electronic level cannot be displayed during movie shooting. (The electronic
level will disappear when you start shooting a movie.)
COPY