Canon C100 Camcorder User Manual


 
103
Playback
IMPORTANT
Observe the following precautions while either of the SD card access indicators is illuminated in red. Failure to
do so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the SD card compartment cover and do not remove the SD cards.
NOTES
You may notice brief stops in video or audio playback between clips.
Playback of clips converted to standard definition (A 108) is limited to only Ð (play) and Ñ (stop). Also,
playback will stop at the end of each clip.
Onscreen Displays
* Appears when [£ LCD/VF Setup] > [Date/Time] is set to [On].
** The audio recording mode is only displayed for clips recorded using the [24 Mbps LPCM] bit rate.
*** Appears when [£ LCD/VF Setup] > [Audio Level] is set to [On].
5 6
10
11
7
8
12
13
14
1
2
4
3
9
1 Remaining battery time (A 49)
2Temperature warning (A 36)
3 Joystick guide (A 104)
4 Recording date and time*
5 Playback operation
6 Currently selected SD card slot (A 102)
7Time code (A 69)
8 Clip number / Total number of clips
9 Bit rate and audio recording mode** (A 50)
10 Frame rate (A 50)
11 Onscreen displays superimposed on video output
(A 114)
12 User bit (A 72)
13 Audio output channel (A 115)
14 Audio level meter***
5 Playback operation
* The playback speed (x5, x15 or x60) will also appear in the indicator.
Ð PLAY Playback
Ý PAUSE Playback pause
Ô/Ó Frame reverse/Frame advance
F FWD × Fast playback*
Ø F REV Fast reverse playback*
COPY