Filter
Top Products
109
E
Using a Memory Card
Preparations
1. Connect the camcorder to the other device.
• S-video/AV terminal: See “Connections for Playback on a TV Screen”
( 33).
• DV terminal: See “Dubbing to/from a Tape with Digital Video Equipment”
( 86).
2. Prepare the other device.
3. Load a memory into the camcorder.
4. Turn the camcorder’s POWER switch to PLAY (VCR) and move
the TAPE/CARD switch to TAPE.
• There is no need to load a cassette if you only record still images onto a
memory card. If a cassette is inserted, make sure the cassette is in stop
mode.
You can record images from a VCR or TV connected through the S-terminal or
AV terminal (analog line-in), as well as images from other digital camcorders
connected through the DV terminal onto the memory card as still images.
• The data code of the still image will reflect the date and time it has been
recorded onto the memory card.
• The image size of a still image recorded from analog or digital devices onto a
memory card will be 640 × 480.
Side with arrow
: Signal flow
+
PLAY
(VCR)
TAPE
Recording from Other Video Devices
Commercially available DV cable