Filter
Top Products
127
E
Using a Memory Card
You can print still images by connecting the camcorder to a printer with Direct
Print function. The Direct Print function can also be used with the print mark
settings ( 119).
Cautions:
• Observe the following precautions during printing, otherwise printing may not
be performed correctly.
- Do not turn off the camcorder or the printer.
- Do not change the position of the TAPE/CARD switch.
- Do not detach the cable.
- Do not remove the memory card.
• Still images not recorded with this camcorder may not be printed correctly on a
printer with direct print function.
Notes:
• The direct print function is supported by the Canon Card Photo Printer CP-10
and Canon Bubble Jet Printers with the logo (as of march 2003).
• Refer to the instruction manual of each printer for information on which
interface cable to use with the camcorder.
The Card Photo Printer CP-10 is supplied with two direct interface cables. Use
the cable with the USB logo on the connector (DIF-100).
• We recommend powering the camcorder from a household power source.
• Refer also to the instruction manual of the respective printer.
• Up to 99 copies per still image and up to 200 still images per memory card can
be selected on the camcorder ( 119).
• The screenshots in this section are examples taken from a printer with direct
print function. Options for the [Style] category will differ slightly depending on
the printer.
Printing with the Direct Print Function
1. Turn off the camcorder and insert a memory card that contains
still images.
Connecting the Printer to the Camcorder
Printer with direct print function