Filter
Top Products
111
E
Using a Memory Card
Recording Motion JPEG Movies on a Memory Card
You can record Motion JPEG movies with the camcorder, from a tape in the
camcorder, or from devices connected via the AV terminal (analog line-in) or the
DV terminal.
Cautions:
• When you are using an SD Memory Card, make sure the protect switch is set to
allow recording.
• While the card access indicator flashes, do not turn off the camcorder,
disconnect the power source or remove the memory card. Doing so could result
in data damage.
• Do not load/unload a tape during recording. Sound will not be recording during
this operation.
Notes:
• Make sure a memory card with enough memory available is inserted into the
camcorder.
• The sound of a movie recorded on a memory card will be monaural.
1. Turn the camcorder’s POWER switch to CAMERA and move the
TAPE/CARD switch to CARD.
2. Press the start/stop button.
• You can record up to 10 seconds in 320 × 240 and 30 seconds in 160 × 120.
• Press the start/stop button to end recording.
• The camcorder starts to write the movie to the memory card when recording
is finished.
Note:
• For using the self-timer ( 71), set the self-timer before step 2, and then press
the start/stop button.
+
CAMERA
CARD
Recording with the Camcorder