Filter
Top Products
20
Do not touch paper while it is being printed. During printing, the sheet repeatedly moves
back and forth along the top of the paper cassette and
in
and out through the paper-handling
slot. Please do not touch the sheet during this process.
Do not allow too many prints to accumulate
in
the print output receptacle. Do not allow
more than 9 sheets
to
accumulate
in
the print output receptacle.
You
may write on the paper with an oil-based pen, but to avoid smUdging please allow
ink time to dry before touching it.
Allow the paper to reach room temperature before installing and using
it. Condensation
may form if you suddenly move the paper from a cold location to a warm location.
If
there
is
risk of condensation, leave the paper
in
its packaging until it reaches room temperature, and
wipe away any moisture before loading
it.
Please avoid the following actions as they may result
in
color change, color fading or
color bleeding.
• Sticking any type of adhesive tape onto the print surface.
• Allowing print surfaces to come into contact with vinyl materials.
• Applying alcohol or other volatile solvents to the print surface.
• Leaving print surfaces tightly pressed against any other surfaces or objects for prolonged
periods.
• Paper Storage
If you wish to mount prints into
an
album, select
an
album with nylon-based sleeves,
or with propylene or cellophane sleeves.
Other types of sleeves may cause color loss or
color bleeding.
Color change may occur over time
in
accordance with conditions of storage. Canon
assumes no liability for color changes.
To
avoid print quality deterioration, do not store your prints
in
the following types of
locations.
• Locations that reach temperatures above
40°C
(104
OF)
• Humid or dusty locations
• Locations exposed to direct sunlight.
Remove unused paper from the paper cassette, return it to the bag and then into its
original package. Store the package horizontally.
-Others
When opening a color ink/paper set (full-sized label set, label set), check the contents.
If something seems
to
be missing or appears to be damaged, contact the dealer for
assistance.