Canon DC420 Camcorder User Manual


 
Introduction • 17
Disc operation
Record, Record pause,
Playback, Playback pause,
, Fast playback,
, Fast reverse playback,
Slow playback,
Slow reverse playback
Remaining recording time
When there is no more disc space available,
END” will be displayed and the recording
will stop.
Remaining battery charge estimate
• When is displayed in red, the battery pack
is exhausted. Replace the battery pack with a
fully charged one.
• Depending on the conditions under which the
camcorder and the battery pack are used, the
actual battery charge may not be indicated
accurately.
Recording reminder
The camcorder counts from 1 to 10 seconds
when you start recording. This is helpful to avoid
scenes that are too short.
Number of still images available on the card
displayed in red: No card
in green: 6 or more images
in yellow: 1 to 5 images
in red: No more images can be recorded
• When viewing the still images, the display will
always be in green.
• Depending on the recording conditions, the
number of available still images displayed may
not decrease even after a recording has been
made, or may decrease by 2 still images at
once.
Card access display
is displayed next to the number of images
available while the camcorder is writing on the
memory card.
Image number
The image number indicates the name and
location of the file on the memory card. For
example, the file name of image 101-0107 is
“IMG_0107.JPG”, stored under the folder
“DCIM\101CANON”.
100% 75% 50% 25% 0%