Canon DC420 Camcorder User Manual


 
78 • Additional Information
NO DISC
- There is no disc in the camcorder. Insert a
disc ( 25).
- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use ( 84).
NO IMAGES
There are no still images on the memory card.
PRINT ORDER ERROR
- You attempted to set more than 998 still
images in the print order ( 61).
REACHED THE MAXIMUM NUMBER OF
SCENES
- The maximum number of scenes has been
reached. Delete some recordings
(DVD-RW in VR mode) to free some space
( 35) or replace the disc.
RECOVERING DATA PLEASE WAIT…
- Data on the disc is being recovered. Wait
until this message disappears before
resuming use.
TASK IN PROGRESS DO NOT
DISCONNECT THE POWER SOURCE
- The camcorder is updating important file
allocation data on the disc. Do not
disconnect the compact power adapter or
remove the battery pack under any
circumstances.
TEMPERATURE TOO HIGH CANNOT
RECORD
TEMPERATURE TOO HIGH CANNOT
REMOVE DISC
- The camcorder has exceeded its
operational temperature. Disconnect the
compact power adapter and remove the
battery pack. Let the camcorder cool
down before resuming use.
TOO MANY STILL IMAGES
DISCONNECT USB CABLE
- Disconnect the USB cable. Try using a
memory card reader or decrease the
number of still images on the memory card
(Windows: fewer than 1,800 still images,
Macintosh: fewer than 1,000 still images).
If a dialog box appeared on the computer
screen, close it and then reconnect the
supplied USB cable.
UNABLE TO RECOGNIZE THE DATA
- The disc may not be recognized by this
camcorder if it was initialized with a
different device.
- You inserted a disc recorded in a different
television system (PAL or SECAM).
UNABLE TO RECOVER DATA
- Could not recover a corrupted file.
- This message can also appear if
condensation has formed. If you suspect
condensation is the reason, do not
initialize the disc and wait until the
camcorder dries completely before
resuming use ( 84).
UNFINALIZE THE DISC
- You cannot record additional scenes on a
finalized DVD-RW in VIDEO mode.
Unfinalize the disc first ( 49).
USE OF A RECOMMENDED DISC IS
ADVISED
- The disc can be used but performance is
not guaranteed. We recommend that you
use a disc whose performance has been
tested with this camcorder ( 7).
Direct Print Related Messages
About Canon PIXMA/ SELPHY DS
Printers: If the printer’s error indicator
flashes or an error message appears on
the printer’s operation panel, refer to the
printer’s instruction manual.
CANNOT PRINT!
- You attempted to print a still image that
was recorded with another camcorder, has
a different compression, or was edited on
a computer.
COMMUNICATION ERROR
- The printer is experiencing a data transfer
error. Cancel printing. Disconnect the USB
cable and turn off the printer. After a
while, turn the printer back on and
reconnect the supplied USB cable.