Filter
Top Products
33
33
Return to Default Settings
Returns the preference settings and all other settings to the factory default settings.
The table lists the major default settings.
Scan Mode...........................................................24bit Color
Magnification ......................................................100%
Histogram ............................................................Highlight: 255, Shadow: 0
Color Correction ..................................................Gamma Value (1.4)
Color Correction Brightness/Contrast...................Brightness: 0, Contrast: 0
Color Correction Color Balance............................0
Color Correction Tone Curve................................Straight line
Color Balance Threshold ......................................128
ColorSync ............................................................Off
Auto Focus...........................................................On
Auto Eject ............................................................On
Film Type Setting..................................................35 mm Color Neg.
Unit .....................................................................Pixels
Output Device......................................................File (2720 dpi)
Preview Window ..................................................Normal
Driver after scanning............................................Close
Set Exposur Value and Focus Value when scanning .Enabled
Control Panel Position..........................................Center
S T E P 2
Click on the [Preferences] menu in the control panel and select [Resets
Default Settings].
The Default Settings dialog box will appear.
Click the [Yes] button to reset the default settings.