Filter
Top Products
Figure 1-2D
3) Do not force open the shutter for the photosensitive drum cover found at the bottom
of the cartridge; do not touch the surface of the photosensitive drum.
If the surface of the photosensitive drum has become soiled, wipe it using a flannel
cloth coated with toner. Do not dry wipe it or use solvent.
4) Do not disassemble the cartridge.
5) Do not subject the cartridge to vibration or impact; in particular, do not force down
the photosensitive drum from above the shutter for the drum cover.
6) Keep the cartridge out of reach of children.
7) The photosensitive drum is susceptible to light and, therefore, equipped with a light-
blocking shutter; nevertheless, exposure to light for a long time can affect the drum,
resulting in copies with white spots or vertical lines. Leave the copier alone for
some time for possible recovery; to avoid residual memory, which results in white
spots or vertical lines, however, keep the following in mind.
Caution:
Work quickly when removing jams or replacing cartridges.
When the cartridge must be removed for work, be sure to put the cartridge in its
storage box or cover it; do not leave it without protective measures once it is
outside the copier.
Reference:
The drum would recover to more or less its normal condition if left alone for five
minutes in a dark place after exposure to an intensity of 1500 lux (about 5 minutes
under general lighting). However, you must try to avoid any exposure. (The rays
of the sun have intensities ranging between about 10000 and 30000 lux.)
1-4
CHAPTER 1 MAINTENANCE AND INSPECTION
2) Do not place the cartridge upright or upside down; do not shake it.