Filter
Top Products
Printing Maintenance
43
Knowing When to Replace Ink Tank
If an ink tank needs replacing, the POWER lamp will change from green to orange and
flash four times, as soon as printing begins. It is important to quickly identify the
empty tank using the BJ Status Monitor (Windows) or error messages (Macintosh) and
replace it.
Should missing characters or white streaks appear despite sufficient ink
levels, refer to “When Printing Becomes Faint or Colors are Incorrect” on
page 48.
The following message appears when ink is empty. Printing will resume as soon as ink tank
is replaced and the Inner Cover and the Top Cover are closed.
When Low Ink is Detected
The BJ Status Monitor appears as soon as a print job starts. [!] indicates a low
ink level. Obtain a replacement tank as soon as possible.
The ink tank with [X] symbol is out of ink.
Replace with a new ink tank.
z Press the RESUME/CANCEL button to resume
printing with an empty ink tank. When printing is
finished, replace the ink tank immediately. If you
continue printing with an empty ink tank, it may
cause problems.
z Menu screens will vary to some degree, depending
on your operating system.
Empty ink tank
Tank with low ink level