Filter
Top Products
Printing Maintenance
62
4 If a message warning you not to perform other operations is displayed, click
OK.
5 Check the printed pattern.
If the pattern is printed as shown below, the Print Head is aligned automatically. The
printer is now ready to use.
z If the pattern is not printed successfully, open the Top Cover and Inner
Cover, and ensure that the ink tanks are correctly installed.
z If the pattern is still not printed successfully, refer to “Eleven flashes”
in “Handling Error Messages” on page 75.
z If results of Automatic Print Head Alignment is not satisfactory, refer to
“Aligning the Print Head” in “Routine Maintenance” of the
User’s Guide
and align the Print Head manually.
(3) Read the message and click Print
Head Alignment.
It takes about 80 seconds to
start printing. Do not open the
Top Cover while printing.