Filter
Top Products
Continued on the following page >>
2.Edit Exposure Mode Settings
– 5 –
6
Select MLT (F) FREQUENCY
If MLT (F) FREQUENCY is not currently selected (in this case, the DWT ENHANCE.,
DWT DEP, and DWT NOISE R. tabs are not displayed), touch the Frequency Pro-
cessing Mode button to open the window, then touch [MLT (F) FREQUECY].
Frequency Processing Mode Window
7
Select the tab
Touch the desired tab from among three tabs: DWT ENHANCE., DWT DEP, DWT
NOISE R.
DWT ENHANCE. Screen
8
Set the parameters
Set the parameters provided with the selected tab, referring to the corresponding descrip-
tions; 2.2 Setting DWT ENHANCE. Tab (→ P.7), 2.3 Setting DWT DEP Tab (→
P. 10) , 2.4 Setting DWT NOISE R. Tab (→ P.13 ).
Frequency
Processing
Mode
Button