Filter
Top Products
– 14 –
3. QA Mode Settings
The examples used in this chapter are the screens of CXDI System Software version 6.3.
3.1 Procedures to Change Parameters
Image processing of the exposure images with CXDI is called QA (Quality Assurance) Process-
ing, and can be performed by adjusting the parameters on the QA Mode screen to optimize the
exposure image.
1
Display the QA Mode screen
Display the QA Mode screen by one of the following methods:
QA Mode Screen
To display the QA Mode screen automatically right after x-ray exposure
On the Exposure screen, touch the followings to display the DISPLAYING PARAME-
TER CHANGE/QA SCREEN DURING EXPOSURE screen:
[SYSTEM] > [SETUP MENU] > [SYSTEM SETUP] > [DISPLAYING PARAME-
TER CHANGE/QA SCREEN DURING EXPOSURE]
Then set the QA Mode screen effective
To perform QA Processing right after x-ray exposure
Touch [QA] on the Preview screen.
To perform QA Processing after examination
Select the exposure image from the Study List, and display the selected image, then
touch [QA].
Availability of Frequency Processing Mode
If your CXDI System Software is the version 5.0 or before, there is no need to select
the frequency processing mode as described in the next step (step 2). Skip the step 2
and proceed to the step 3.